nRF52833 DK Development kit

Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee development kit for the nRF52833 SoC

The nRF52833 DK is an affordable single-board development kit for development of Bluetooth® Low Energy, Bluetooth mesh, NFC, Thread and Zigbee applications on the nRF52833 SoC. It also supports development on the nRF52820 SoC.

The kit is hardware compatible with the Arduino Uno Rev3 standard, making it possible to use a wide range of 3rd-party shields that are compatible with this standard, including the Power Profiler Kit from Nordic Semiconductor. The nRF52833 DK is also compatible with the Power Profiler Kit II.

An included NFC antenna can be connected the kit to use the on-chip NFC-A tag functionality. The kit allows access to all I/O and interfaces via connectors and has 4 LEDs and 4 buttons which are user-programmable.

The DK is typically powered with USB, but can be powered by a wide range of sources, within the supply range of 1.7 to 5.0 V. In addition to USB, it can be powered with external source, but also includes a CR2032 battery holder and a Li-Po battery connector, for in-field testing. Current consumption can be measured by using the dedicated current measurement pins.

And on-board SEGGER J-link debugger allows programming and debugging both the on-board SoC and external SoCs through the debug out header.

Hardware layout and schematics are available under Downloads.

Download PDF  Download nRF52833 DK product brief [PDF]

Ask us about this
Key features

Supports Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee

User-programmable LEDs(4) and buttons(4)

2.4 GHz and NFC antennas

SWF RF connector for direct RF measurements

On-board SEGGER J-Link debugger/programmer

Arduino Uno Rev3 form factor

Pins for measuring power consumption

1.7-5.0 V supply from USB, external, Li-Po battery or CR2032 coin cell battery

Documentation
Downloads
CE Certification

Peripheral UART

Demo firmware

Selected version
1.0.0

Changelog:

1.0.0

SHA256: 7379a538ac9105fc1567c25d88faa2fdf81bf01a116e4103c7a87ea965a75e45

Built using nRF Connect SDK v2.0.0

Interface MCU firmware

Selected version
170724 J-LINK

Changelog:

170724 J-LINK

nRF5x-OB-JLink-IF

Hardware files

Selected version
2.0.0 Layout and BOM resources

Changelog:

2.0.0 Layout and BOM resources

  • Changing interface MCU to nRF5340 SoC

1.1.0 Layout and BOM resources

SHA256: D9827E4BC7FCEAF495C078B1A0C489D7F352029097253830C5EDDBF3AF64BCA6

  • BOM change, updating nRF52833 build code: nRF52833-QIAAB0

1.0.1 Layout and BOM resources

SHA256: FA0FCDDB317F247C53BB239E1A356383016A4DF8DA9D648ED07ED83952F4C130

  • BOM change due to EOL component

1.0.0 Layout and BOM resources

Changelog:

  • Updated grounding of 32MHz crystal
  • Changed to production version of nRF52833 SoC

0.9.0 Layout and BOM resources

First public release.

CE Certification

Selected version
1.0.0

Changelog:

1.0.0